——
Cut Susceptibility Tester
Applicable standards: IEC 61730-2:2021 UL 1703-2018, ASTM E2685-2009
Distance from pivot to center point of load bearing: 150mm
Distance from shaft to test point: 170mm
Carbon steel strip thickness: 0.64mm±0.05mm
Direct use saw blade, made of tool steel, easy to replace
Angle between carbon steel strip and horizontal plane: 140°
Force applied at point Q: 8.9N±0.5N
Knife radius: 0.115mm ± 0.025mm
angle: 90 °
Speed requirements: 150mm/s±30mm/s, traction head angle can be adjusted arbitrarily
Cut Susceptibility Tester
Applicable standards: IEC 61730-2:2021 UL 1703-2018, ASTM E2685-2009
Distance from pivot to center point of load bearing: 150mm
Distance from shaft to test point: 170mm
Carbon steel strip thickness: 0.64mm±0.05mm
Direct use saw blade, made of tool steel, easy to replace
Angle between carbon steel strip and horizontal plane: 140°
Force applied at point Q: 8.9N±0.5N
Knife radius: 0.115mm ± 0.025mm
angle: 90 °
Speed requirements: 150mm/s±30mm/s, traction head angle can be adjusted arbitrarily
